Audinate Dante-MY16-AUD Betriebsanweisung PDF herunterladen (Seite 18)

Dante Firmware Update Manager User Guide

Version 1.10 Commercial in Confidence Page 18 of 19

6. Select the devices that you wish to recover, and click Start.

A pop-up is displayed confirming that you wish to proceed.

7. Click OK to start the recovery.

Firmware Update Manager will display 'Processing Safe Recovery', and then 'Safe recovery Done' when

the device/s are recovered.

The Dante module will reboot automatically.

Note: You will need to power cycle the host device (e.g. the mixing console containing the Dante

module) after the Dante module automatically reboots.

8. Apply the appropriate firmware update from your device manufacturer, to bring the module firmware

back up to the latest version.

Expanded Search

Older Dante-MY16-AUD and DLM devices may not appear in the failsafe device list. To see these

devices, click the 'Expanded Search' checkbox. The Expanded Search option may also display

devices that are not actually in failsafe. Dante-MY16-AUD devices have MAC addresses beginning

00:1d:c1:03. DLM devices have MAC addresses beginning 00:1d:c1:01. When the relevant device/s

appear in the list, follow the above procedure from step 6.

No safe mode devices found

This popup indicates that Firmware Update

Manager has not detected any devices in safe

mode on the network.

Check to ensure that your safe mode device/s are

connected to the same network as Firmware

Update Manager.

If you are sure that a device is in safe mode, but

Firmware Update Manager cannot find it, contact

your device manufacturer.

1 2 ... 13 14 15 16 17 18 19

Keine Kommentare

Audinate Dante-MY16-AUD Betriebsanweisung Seite 18